AKM 47 Sporter Conversion

Before Conversion With Sporter Furniture

Before Conversion With Sporter Furniture

Most Sporters/Pre-Bans Have Welded On Thread Protectors Or No Threads At All. The Weld Must Be Cut Or Barrel Threaded To Add A Muzzle Device.

Some Sporters/Pre-Bans Have A Cut In The Back Of The Receiver. Cuts Like These Prevent You From Installing Actual AK Furniture. This Cut Should Be Squared Off So You Can Install An Actual AK Butt Stock.

If This Area Is Not Squared Off Or Reinforced The AK Butt Stock Will Not Be Stable.

The Rear Of The Receiver Was Squared Off By TIG Welding A Section And Reinforcement Plate Onto The Sporter Receiver. The Reinforcement Plate Also Strengthens The Rear While Shooting Without A Stock. A Flush QD Mount Was Also Added Which Eliminates Permanent Sling Swivels.

The Sporter Had An AKM Receiver Which Takes Fixed Butt Stocks But The Client Wanted A Folding Stock. AKM Rear Trunnions Have To Be Changed To An AKS Or Folding Trunnion Which Is Possible But Costly. So To Keep Cost Down A Polish Side Folding Stock Was Installed Which Can Be Used With An AKM Rear Trunnion.

Along With A Hogue Grip A M.I. Rail Was Installed To Mount A Trijicon RMR & MagPul Grip.

The Sporter Had A Welded On Thread Protector Which Was Cut Off & The Threads Were Cleaned. Once Removed A Lantac Dragon Muzzle Brake Was Installed.