AKM Sporter Conversion

AKM 47 Sporter Conversion

AKM 47 Sporter Conversion

Before Conversion With Sporter Furniture

Before Conversion With Sporter Furniture

Before Conversion With Sporter Furniture

Before Conversion With Sporter Furniture

Must Sporters/Pre-Bans Have Welded On Thread Protectors Or No Threads At All.  The Weld Must Be Cut Or Barrel Threaded To Add A Muzzle Device.

Most Sporters/Pre-Bans Have Welded On Thread Protectors Or No Threads At All. The Weld Must Be Cut Or Barrel Threaded To Add A Muzzle Device.

Some Sporters/Pre-Bans Have A Cut In The Back Of The Receiver.  Cuts Like These Prevent You From Installing Actual AK Furniture.  This Cut Should Be Squared Off So You Can Install An Actual AK Butt Stock.

Some Sporters/Pre-Bans Have A Cut In The Back Of The Receiver. Cuts Like These Prevent You From Installing Actual AK Furniture. This Cut Should Be Squared Off So You Can Install An Actual AK Butt Stock.

If This Area Is Not Squared Off Or Reinforced The AK Butt Stock Will Not Be Stable.

If This Area Is Not Squared Off Or Reinforced The AK Butt Stock Will Not Be Stable.

The Rear Of The Receiver Was Squared Off By TIG Welding A Section And Reinforcement Plate Onto The Sporter Receiver.  The Reinforcement Plate Also Strengthens The Rear While Shooting Without A Stock.  A Flush QD Mount Was Also Added Which Eliminates Permanent Sling Swivels.

The Rear Of The Receiver Was Squared Off By TIG Welding A Section And Reinforcement Plate Onto The Sporter Receiver. The Reinforcement Plate Also Strengthens The Rear While Shooting Without A Stock. A Flush QD Mount Was Also Added Which Eliminates Permanent Sling Swivels.

The Sporter Had An AKM Receiver Which Takes Fixed Butt Stocks But The Client Wanted A Folding Stock.  AKM Rear Trunnions Have To Be Changed To An AKS Or Folding Trunnion Which Is Possible But Costly.  So To Keep Cost Down A Polish Side Folding Stock Was Installed Which Can Be Used With An AKM Rear Trunnion.

The Sporter Had An AKM Receiver Which Takes Fixed Butt Stocks But The Client Wanted A Folding Stock. AKM Rear Trunnions Have To Be Changed To An AKS Or Folding Trunnion Which Is Possible But Costly. So To Keep Cost Down A Polish Side Folding Stock Was Installed Which Can Be Used With An AKM Rear Trunnion.

Along With A Hogue Grip A M.I. Rail Was Installed To Mount A Trijicon RMR & MagPul Grip.

Along With A Hogue Grip A M.I. Rail Was Installed To Mount A Trijicon RMR & MagPul Grip.

The Sporter Had A Welded On Thread Protector Which Was Cut Off & The Threads Were Cleaned.  Once Removed A Lantac Dragon Muzzle Brake Was Installed.

The Sporter Had A Welded On Thread Protector Which Was Cut Off & The Threads Were Cleaned. Once Removed A Lantac Dragon Muzzle Brake Was Installed.

AK 47/74/Variants Ambi Safety

Ambidextrous safety for all AK variants.   A modified traditional selector is used on the right and the left lever is located near the top of the pistol grip.

Ambidextrous safety for all AK variants. A modified traditional selector is used on the right and the left lever is located near the top of the pistol grip.

This modification can be done to AK AKM & AKS receivers.  For example we started with an Arsenal AK47(milled) receiver.

This modification can be done to AK AKM & AKS receivers. For example we started with an Arsenal AK47(milled) receiver.

Bottom View A slot is then milled for the left selector.

Bottom View
A slot is then milled for the left selector.

Top View A slot is milled for the left selector.

Top View
A slot is milled for the left selector.

The left selector is attached to the right selector.

The left selector attaches to the right selector.

The only permanent modification would be the slot in the receiver.  A new ambi selector and grip must be purchased.

The only permanent modification would be the slot in the receiver. A new ambi selector and grip must be purchased.

The ambi safety allows the shooter to engage the safety without removing both hands from the rifle.

The ambi safety allows the shooter to engage the safety without removing both hands from the rifle.

The selector can also be moved to the fire position without removing both hands from the rifle.

The selector can also be moved to the fire position without removing both hands from the rifle.

Along with the ambi safety system LMG can take care of all of your AK needs. A bottom rear tang side scope mount and magazine release were installed to complete this receiver. This receiver is going to be used for a RPK build which will be posted when completed.

Along with the ambi safety system LMG can take care of all of your AK needs.
A bottom rear tang side scope mount and magazine release were installed to complete this receiver.
This receiver is going to be used for a RPK build which will be posted when completed.

LMG plans on manufacturing a few different styles of ambi safeties including one that does not need a new grip or receiver modifications.  If your AK has a side scope mount you may only be able to use the selector for the modified receiver.  Pricing for the kits to come soon.  Modifications to the receivers will still be T&M.

LMG plans on manufacturing a few different styles of ambi safeties including one that does not need a new grip or receiver modifications. If your AK has a side scope mount you may only be able to use the selector for the modified receiver. Pricing for the kits to come soon. Modifications to the receivers will still be T&M.

Cheaper Options For Mounting The Mosin Nagant

In the past if you wanted scope your Mosin-Nagant to resemble the 91/30 PU you had to spend $300 plus just for the scope and mount.  Firefield now sells a scope & mount for less than $180.  Tapping & pinning for additional charge.

In the past if you wanted scope your Mosin-Nagant to resemble the 91/30 PU you had to spend $300 plus just for the scope and mount. Firefield now sells a scope & mount for less than $180. Tapping & pinning for additional charge.

The stock still must be milled for an additional charge.

The stock still must be milled for an additional charge.

The bolt must be extended for an additional charge.

The bolt must be extended for an additional charge.

The Firefield PU scope WILL NOT fit in an original mount.  The mount screw and pin holes WILL fit an action already set up to accept a side mount.

The Firefield PU scope WILL NOT fit in an original mount. The mount screw and pin holes WILL fit an action already set up to accept a side mount.

Going with the side mount allows you to still use you iron sights.

Going with the side mount allows you to still use you iron sights.

Remington 788/.44Rem Mag Refinish

Remington 788  Manganese Parkerizing & Painted Matte Black

Remington 788
Manganese Parkerizing & Painted Matte Black

Remington 788/.44Rem Mag With A Durable Finish Ready For Field Use.  Rifles Chambered For Straight Wall Cartridges Can Now Be Used For Hunting In OHIO>

Remington 788/.44Rem Mag With A Durable Finish Ready For Field Use. Rifles Chambered For Straight Wall Cartridges Can Now Be Used For Hunting In OHIO>

The Bolt Face And Small Parts Were Only Parkerized

The Bolt Face And Small Parts Were Only Parkerized

The 788 Had Ramp Style Sights from The Factory, When Removed Screw Holes Are Present.  Those Holes Were Filled And Then Blended Into The Profile.

The 788 Had Ramp Style Sights from The Factory, When Removed Screw Holes Are Present. Those Holes Were Filled And Then Blended Into The Profile.

Rear Sight Holes Filled And Finished

Rear Sight Holes Filled And Finished

Front Sight Holes Filled & Finished

Front Sight Holes Filled & Finished

SIG P6/P225 Revamp

Surplus SIG P6/P225

Surplus SIG P6/P225

Surplus SIG P6/P225

Surplus SIG P6/P225

All internals checked and parkerized

All internals checked and parkerized

This is also a good time to change springs if needed

This is also a good time to change springs if needed

Locking block also parkerized

Locking block also parkerized

DSC_0112

Night sights installed

Night sights installed

DSC_0115

All painted steel parts are parkerized before painting

DSC_0116

The frame was finished Combat Gray

DSC_0117

Slide and external small parts finished with matte black

DSC_0118

Winchester 94 38-55WCF

With the gun laws changing in Ohio for hunting we have seen an increase of rifles chambered or converted to straight wall cartridges.

Winchester 94 30-30 barreled to 38-55.  The 38-55 barrel was cut for a top eject so it had to be opened up for a side eject. The magazine tube and forearm were not supplied by the client.

Winchester 94 W/30-30 Barrel

Winchester 94 W/30-30 Barrel

38-55 Barrel W/Top Eject Cut Out

38-55 Barrel W/Top Eject Cut Out

38-55 Barrel Opened Up To Side Eject

38-55 Barrel Opened Up To Side Eject

Winchester 94 W/38-55 Barrel

Winchester 94 W/38-55 Barrel

DSC_0099 DSC_0100